点击图片查看原图
产品特点
1.C型单柱设计，机身整体铸造，经过高温时效处理，刚性好，变形量小。
2. 整机控制系统采用进口高端名牌产品，PLC，触摸屏采用西门子、三菱、威纶等高端品牌，液压系统采用进口双比例系统阀（具体配置见配置清单）。
3.双工位设计，节省工作时间，大幅度提高工作效率。
4专业设计适用于各种零件部的翻边，铆合作业。如：汽车球头，硅油离合器等铆合产品。
5.变频动力头设计，主轴转速任意调节、操作简洁、作用范围广。
6.全油压系统，压力大，工作性能稳定，压力精度高、调节范围大。
7可设定全自动、半自动和点动功能。
8.安全设计，采用全自动操作和双手操作，设有急停及上下点动功能。
9向下行时具有快进和增压工进两种速度，快进提高工作效率：增压工进速度可任意调节，提高产品压装质量，保护模具和产品。
10.采用手动按钮与脚踏两种循环启动方式。
11.铆接产品的直径范围广，只需要调节旋铆头的开头，就能铆接不同直径的产品。
12.红外线操作安全保护感应装置（根据客户需求选配）
13.密封件采用日本NOK和台湾鼎基。
14.（汽车球头）专机可选配扭力检测装置。
Product feature
1. The C-body design,whole body casting, After high temperature aging treatment,
,rigid and stable,The deformation is small
2. The whole control system is using
3.The whole hydraulic system,the pressure is strong,the work performance is stable,the stroke of stamping design,using both hands to operate,with emergency stop and jog up down function.
4.Security design,using both hands to operate ,with emergency stop and jog up and down function.
5. Frequency power head，adjusting speed arbitrary，wide speed range.
6. Multistation squeezer can reduce labor costs,floor space and increase output ,improve efficiency.
7.
8. Safety design，using both hands to operate，with mergency stop and jog up and down function.
9. Spindle down, with two speeds ，fast-forward and slow forward , fast forward speed is fast and can improve work efficiency；Slow forward speed can be adjusted ，to improve the quality of press-fit, protection of mold and products.
10. Two of the cycle start-up mode: buttons and pedals
11.
12. Infrared protection device (according to customer's requirements)
13. The seal is NOK from Japan and Taiwan tripod base, hydraulic fittings using brand-name products of taiwan
14. Can be equipped with a torque detection device to facilitate the detection of spin riveting quality(ball special purpose machine.
