【光电测量产品】
光源 真空紫外光谱仪 订制光谱仪 软X射线光谱仪 拉曼光谱仪 红外\紫外激光观察仪 夜视仪器 HPLC荧光光度计 CCD相机 动态光散射 高速摄影照相机 光纤光谱仪 海洋系列光谱仪 光谱系统 原子力显微镜 探测器 滤光片 红外光谱仪 单色仪 光栅 照度计 光信号电子学仪器 工业内窥镜 薄膜测量 PC示波器 数字记录仪 远红外太赫兹光谱仪 太阳光模拟器 袖珍数码显微镜相机 压电陶瓷 紫外线固化机 紫外反射镜 滤光片测量仪 电动位移台/电控位移台 纳米位移台 光电探测器 均匀光源
【激光系列产品】
光纤激光器 多模泵浦激光器 激光二极管未封装bar 激光二极管冷却装置 激光器电源 氦氖激光器 CO2激光器 半导体泵浦激光器 氩离子激光器 氦镉激光器 氮分子激光器 皮秒激光器 激光二极管电源 激光光谱测量 激光能量计/功率计 激光雕刻、打标、切割机 激光二极管模块 深紫外、紫外固体激光器 信号发生器 超快飞秒激光器 热电制冷产品 激光光束定位系统 激光光束分析仪 视频显微镜测量系统 激光准直器 多通道激光功率计 半导体激光器 激光测距仪 红外激光显示卡 调Q激光器 激光护目镜 光学平台 光学调整架 光学微调架 可调嵌入式光学调整架 倾斜位移台 通用调整台 光学延迟线 手动位移台 XY位移台 光学旋转台 角位移调整台 激光器附件 可变光阑 扩束镜 拉曼激光器 大功率光纤耦合激光器 单模垂直腔面发射激光器
【分析仪器产品】
电化学检测仪器 电泳系列仪器 分光光度计 色度计 浊度计 注射泵 紫外台 凝胶成像系统 分析仪 ICP电感耦合 气相色谱仪 HPLC高效液相色谱 红外光谱仪 电子鼻 传感器 蒸发仪 凯氏定氮仪 熔点仪 干燥仪 荧光光度计 火焰光度计 热分析仪 溶出度仪 X射线衍射仪 进样器 X射线荧光光谱仪 全自动仪器 三维表面轮廓仪
【生化仪器产品】
恒温孵育器 核酸蛋白分析仪 摇床 真空泵 枪头、PCR附件 柱温箱 冰箱 移液枪 低温培养箱 生物芯片扫读仪 工作台 叶绿素效能荧光仪 动物注射泵 恒温水浴 振荡器 离心机
【元件耗材】
窗片 棱镜 透镜 激光棒 晶体 反射镜 分光镜 偏光镜/偏光片 光学基片
【光通信仪器】
ASE光源 光接收机 光纤放大器 光发射机 光通信激光器 探测器
| 光电测量产品 >> 光谱系统 >> 光纤光损耗光谱测量系统 |
|
 |
The Bentham Fibre Spectral Loss System is a modular system consisting of chopped light source, monochromator, launch optics, detector and lock-in amplifier. The whole system is controlled by a PC which also calculates loss in dB/km as a function of wavelength.
Spectrol Loss in fibres is usually measured by the cut-back method. Modulated while light is passed through a monochromator before being launched into one end of the fibre under test. The light emitted from the other end of the dibre is collected by a large area indium gallium arsenide or silicon detector and the resulting signla amplfied by a lock-in amplfier. The detector end of the fibre is then cut back by a known length and the cleaved end reinserted in the detector assembly. The spectral loss of the fibre is calculated from the two stored curves as follows:
Spectral Loss (dB/km) = log10 (short/long)/cutback
|
The prime system requirements are:
- light throughput of the monochromator
- stability of light output
- mechanical stability
|
The final signal-to-noise ratio and hence speed and accuracy of measurement is dominated by the level of light reaching the detector. In all real systems this light level is limited by the efficiency and light throughput of the monochromator.
When comparing various commercially available monochromators you find that most have an f number in the region of 4. It is a common misconception to assume that light throughput can be assessed by comparing f number alone. This is not the case. For a given spectral bandwidth, a large f/4 monochromator (long focal length, large mirrors and gratings) will operate with wider slits than a small f/4 unit. This wider slit allows more power through and into the fibre.
The Bentham system uses a 300mm focal length, f/4 monochromator to launch 5nW or -53dBm (cw) into a single mode fibre (1300nm, 10nm bandwidth).
|
Stability
Due to the sequential nature of the measurement, both optical and mechanical stability over the period of the two spectral runs is of critical importance.
For the Bentham range, optical stability is ensured by the IL1 light source, which uses a 100W QH lamp controlled by a highly stabilised constant current power supply. This power supply is at least 10 times more stable than a normal laboratory stabilised supply.
Mechanical instability in such systems results in short or long term wander of the focussed spot over the end of the fibre at the launch end. In the Bentham system the light source and launch optics are bolted firmly to the monochromator, which is constructed from a single rigid casting.
|
|
免责声明：
本网站内容来源于网友提供和互联网公开资料等，仅供参考。本网站不对网站所有信息的准确性、可靠性或完整性提供任何保证，交易汇款需谨慎，请注意调查核实。若文中涉及有违公德、触犯法律的内容，一经发现，立即删除，作者需自行承担相应责任。涉及到版权或其他问题，请及时联系，我们将在收到通知后第一时间妥善处理。
点击图片查看原图
